Trinzik™ HCM Solvent Dilute Acid and Base Filters
These high-performance filters reliably control defect-causing contaminants in solvent and dilute acid and base applications.
● HCE, HCM, and HC0 configurations are designed to effectively control contaminants in chemical manufacturing within the semiconductor, hard disk drive and flat panel display industries
● High-porosity, hydrophilic and hydrophobic PTFE membranes enables high flow rate and reduce operational costs
● Small pore size membrane design enables advanced particle removal and increases yield
● Polypropylene (PP) and high density polyethylene (HDPE) construction lowers extractables and ensures clean filtration operations
HCM filters:
Hydrophobic ultra, high-flow PTFE membrane for large volume solvent and aqueous applications
These high-performance filters reliably control defect-causing contaminants in solvent and dilute acid and base applications.
● HCE, HCM, and HC0 configurations are designed to effectively control contaminants in chemical manufacturing within the semiconductor, hard disk drive and flat panel display industries
● High-porosity, hydrophilic and hydrophobic PTFE membranes enables high flow rate and reduce operational costs
● Small pore size membrane design enables advanced particle removal and increases yield
● Polypropylene (PP) and high density polyethylene (HDPE) construction lowers extractables and ensures clean filtration operations
Download：
Specifications：
HCM filters:
Hydrophobic ultra, high-flow PTFE membrane for large volume solvent and aqueous applications
| Materials of construction: |
Membrane: Hydrophilic PTFE Supports, core, sleeve: Polypropylene (PP) O-ring: encapsulated FKM (E-FKM), encapsulated silicone (E-SiL), EPDM, FKM |
| Retention rating: |
30 nm, 0.05 µm, 0.1 µm |
| Cartridge connections: |
Code 0 (222 Flat), Code 5 (222 Fin), Code 6 (226 Flat), Code 7 (226 Fin) |
| Maximum operating conditions: |
Maximum forward differential pressure: 5.5 bar (80 psid) @ 25°C (77°F) 2.1 bar (30 psid) @ 60°C (140°F) Maximum reverse differential pressure: 3.4 bar (50 psid) @ 25°C (77°F) Maximum temperature: 60°C (140°F) |
| Dimensions: |
Length: 10", 20", 30" Diameter: 69 mm (2.7") |
