Impact® 2 Disposable Filters
Rapid change-out UPE membrane filters for point-of-use photochemical filtration, including photoresists and solvents
● Developed for use with the Impact® 2 manifold and IntelliGen® dispense systems
● Point-of-use photochemical and solvent filtration
● Minimal chemical exposure, rapid connection design
● UPE and surface modified UPE membrane technology
● Low hold-up volume minimizes chemical waste
Download：
Specifications：
Rapid change-out UPE membrane filters for point-of-use photochemical filtration, including photoresists and solvents
● Developed for use with the Impact® 2 manifold and IntelliGen® dispense systems
● Point-of-use photochemical and solvent filtration
● Minimal chemical exposure, rapid connection design
● UPE and surface modified UPE membrane technology
● Low hold-up volume minimizes chemical waste
Download：
Specifications：
| Materials: |
Membrane: Ultra-high molecular-weight polyethylene (UHMWPE) Supports (upstream, downstream and mold): High-density polyethylene (HDPE) |
| Manifold fittings: |
6.35 mm Flowell® 60 type 5/3 mm Flowell® 60 type 6/4 mm Flowell® 60 type 6.35 mm Super Type Pillar® |
| Maximum operating conditions: |
Maximum inlet pressure: 0.34 MPa (3.4 bar, 50 PSI) @ 25°C (77°F) Maximum forward/reverse differential pressure: 0.27 MPa (2.7 bar, 40 PSI) @ 25°C (77°F) Maximum operating temperature: 40°C (104°F) |
| Membrane area: |
0.01 μm: 1,390 cm2 (1.5 ft2) 0.02 μm: 1,300 cm2 (1.4 ft2 All others: 1,000 cm2 (1.08 ft2) |
| Hold-up volume: |
<=55 cc |
| Compatibility: |
PGMEA, PGME, NMP, ethyl lactate, MMP and cyclohexanone |
| Wettability: |
Spontaneously wets in butyl acetate, PGMEA, PGME, ethyl lactate, MMP, ECA, NMP |
